.404 x .063 Ripping Chain
$61.00 – $725.00
Description
We offer Granberg Ripping Chain in both rolls and pre-cut loops!
Simplify the chain buying experience! Granberg Ripping Chain is available pre-made for most
common bar sizes and styles, simply consult your bar for the proper link count and choose from
the list below.
Don’t see your link count listed? Call our sales department at 800-233-6499 and we will happily
cut one to order!
Bulk chain also available in 50FT and 100FT rolls. Save $0.75 off every foot for the 50FT rolls and $1 off every foot on the 100FT rolls! (tie straps and rivets included with
purchase).
CHOICES:
PART NUMBER: G7303-104DL. 104 DRIVE LINKS. $61.00.
PART NUMBER: G7303-108DL. 108 DRIVE LINKS. $63.22.
PART NUMBER: G7303-111DL. 111 DRIVE LINKS. $64.87
PART NUMBER: G7303-122DL. 122 DRIVE LINKS. $71.06
PART NUMBER: G7303-123DL. 123 DRIVE LINKS. $71.56.
PART NUMBER: G7303-124DL. 124 DRIVE LINKS. $72.13. Fits G778-30C2
PART NUMBER: G7303-134DL. 134 DRIVE LINKS. $77.74
PART NUMBER: G7303-138DL. 138 DRIVE LINKS. $79.97. Fits G778-36C2
PART NUMBER: G7303-142DL. 142 DRIVE LINKS. $82.20.
PART NUMBER: G7303-148DL. 148 DRIVE LINKS. $85.50.
PART NUMBER: G7303-152DL. 152 DRIVE LINKS. $87.81
PART NUMBER: G7303-154DL. 154 DRIVE LINKS. $88.36. Fits G778-48C2
PART NUMBER: G7303-173DL. 173 DRIVE LINKS. $99.44.
PART NUMBER: G7303-176DL. 176 DRIVE LINKS. $101.17
PART NUMBER: G7303-177DL. 177 DRIVE LINKS. $101.75.
PART NUMBER: G7303-178DL. 178 DRIVE LINKS. $102.24. Fits G778-56C2
PART NUMBER: G7303-180DL. 180 DRIVE LINKS. $103.40.
PART NUMBER: G7303-190DL. 190 DRIVE LINKS. $108.93.
PART NUMBER: G7303-192DL. 192 DRIVE LINKS. $110.08.
PART NUMBER: G7303-194DL. 194 DRIVE LINKS. $111.50. Fits G778-60C2
PART NUMBER: G7303-196DL. 196 DRIVE LINKS. $112.31.
PART NUMBER: G7303-220DL. 220 DRIVE LINKS. $125.67. Fits G77872C2
PART NUMBER: G7303-222DL. 222 DRIVE LINKS. $126.83.
PART NUMBER: G7303-250DL. 250 DRIVE LINKS. $142.42. Fits G778-84C2
PART NUMBER: G7303-50RL. 50 FOOT ROLL. $375.00
PART NUMBER: G7303-100RL. 100 FOOT ROLL. $725.00
*CHAIN SOLD BY THE DRIVE LINK COMES LOOPED AND READY TO USE.
DON’T SEE WHAT YOU’RE LOOKING FOR? GIVE US A CALL AT 925-380-9400, or Toll-Free 800-233-6499.
General Description: Granberg ripping saw chain is made up of one set (2) scoring cutters and one set (2) clearing cutters. While there are many companies that sell chain for milling, no other company offers ripping chain that features our specific modifications to the top plate. Our process shaves off approximately half of the tooth lengthwise on the first and second cutter links of each 4 link group. By this method, each tooth takes only ¼ of the kerf, takes less feeding pressure than conventional chain, cuts faster, smoother, and takes less power than conventional full tooth (cross cut) chain.
DISCLAIMER:
While Granberg always strives to provide the best quality product possible, it is impossible for us to anticipate everything that might go wrong with an individual milling experience. For that reason, we do not offer any warranty on Granberg ripping chain. Even under ideal conditions, milling and rip cuts are inherently hard on chain, and you should expect to sharpen your chain every 3-5 cuts. You can find a list of best practices to prevent damaged chain here.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
Levi S (verified owner) –
Granberg’s ripping chains are the absolute best! They hold an edge better than any other ripping chain, cut faster, clear sawdust the best, and leave such a smooth finish! The Scoring cutters really make a big difference. I’ve used four other brands of ripping chains and will now only be using Granberg ripping chains.
Mikhail (verified owner) –
Milling oak, ash, walnut logs for ~3 years. Stihl MS661 & MS881. Tried chains Stihl, Oregon, Oregon Ripping, Woodland (Bailey’s), Granberg. They all cut about the same speed and similar smoothness. However, they get dull quite distinct. Cross-cut chains 30 degree get dull the fastest, hustle of changing chains too many times on the Alaskan mill. Woodland ripping the next. Then Oregon ripping, holds edge better than the above. Finally, Ganberg ripping chains – hold edge about 20-30% longer. This is for comparing the same pitch chains. Across pitches 404 keeps an edge longer about 20% vs. 3/8.