.404 x .063 Ripping Chain – PRE CUT CHAIN

Description

We now offer Pre-Cut Loops of Granberg Ripping Chain!

Simplify the chain buying experience. Granberg Ripping Chain is available for most common bar sizes and styles.

 

CHOICES:

PART NUMBER: G7303-104DL. 104 DRIVE LINKS. $61.00.

PART NUMBER: G7303-108DL. 108 DRIVE LINKS. $63.22.

PART NUMBER: G7303-111DL. 111 DRIVE LINKS. $64.87

PART NUMBER: G7303-122DL. 122 DRIVE LINKS. $71.06

PART NUMBER: G7303-123DL. 123 DRIVE LINKS. $71.56.

PART NUMBER: G7303-124DL. 124 DRIVE LINKS. $72.13. Fits G778-30C2

PART NUMBER: G7303-134DL. 134 DRIVE LINKS. $77.74

PART NUMBER: G7303-138DL. 138 DRIVE LINKS. $79.97. Fits G778-36C2

PART NUMBER: G7303-142DL. 142 DRIVE LINKS. $82.20.

PART NUMBER: G7303-148DL. 148 DRIVE LINKS. $85.50.

PART NUMBER: G7303-152DL. 152 DRIVE LINKS. $87.81

PART NUMBER: G7303-154DL. 154 DRIVE LINKS. $88.36. Fits G778-48C2

PART NUMBER: G7303-173DL. 173 DRIVE LINKS. $99.44.

PART NUMBER: G7303-176DL. 176 DRIVE LINKS. $101.17

PART NUMBER: G7303-177DL. 177 DRIVE LINKS. $101.75.

PART NUMBER: G7303-178DL. 178 DRIVE LINKS. $102.24. Fits G778-56C2

PART NUMBER: G7303-180DL. 180 DRIVE LINKS. $103.40.

PART NUMBER: G7303-190DL. 190 DRIVE LINKS. $108.93.

PART NUMBER: G7303-192DL. 192 DRIVE LINKS. $110.08.

PART NUMBER: G7303-194DL. 194 DRIVE LINKS. $111.50. Fits G778-60C2

PART NUMBER: G7303-196DL. 196 DRIVE LINKS. $112.31.

PART NUMBER: G7303-220DL. 220 DRIVE LINKS. $125.67. Fits G77872C2

PART NUMBER: G7303-222DL. 222 DRIVE LINKS. $126.83.

PART NUMBER: G7303-250DL. 250 DRIVE LINKS. $142.42. Fits G778-84C2

EVERY CHAIN COMES LOOPED AND READY TO USE.

 

DON’T SEE WHAT YOU’RE LOOKING FOR? GIVE US A CALL AT 925-380-9400, or Toll-Free 800-233-6499.

 

General Description: Granberg ripping saw chain is made up of one set (2) scoring cutters and one set (2) clearing cutters. While there are many companies that sell chain for milling, no other company offers ripping chain that features our specific modifications to the top plate. Our process shaves off approximately half of the tooth lengthwise on the first and second cutter links of each 4 link group. By this method, each tooth takes only ¼ of the kerf, takes less feeding pressure than conventional chain, cuts faster, smoother, and takes less power than conventional full tooth (cross cut) chain.