3/8 LOW PRO .050 GAUGE – G729-2 FOR LOW PROFILE BARS ONLY | Discontinued
4 WEEK LEAD TIME
PLEASE NOTE: LOW PROFILE CHAIN IS DESIGNED FOR SPECIFIC BARS AND WILL NOT WORK ON STANDARD 3/8 BARS. IF YOU COUNT MORE THAN 72 DRIVE LINKS, YOU CAN BE SURE THAT YOU DO NOT NEED LOW PRO CHAIN. IF UNSURE, PLEASE CALL BEFORE ORDERING.
NOT SURE WHAT RIPPING CHAIN IS RIGHT FOR YOU?
YOUR STEP BY STEP GUIDE TO SELECTING THE RIGHT RIPPING CHAIN CAN BE FOUND HERE: COMPLETE GUIDE TO RIPPING CHAIN
NOT SURE HOW TO ORDER?
CLICK ON “VIDEO: How To Order Chain” TAB (ABOVE RIGHT) FOR A VIDEO WALK-THROUGH OF THE CHAIN PURCHASING PROCESS
Not familiar with Granberg terminology? Here’s some quick definitions:
1 LOOP = 1 CHAIN. A loop of chain means one length of chain that has been linked together. * We loop every chain unless otherwise requested, so they are ready to use out of the box. There is a $3 loop handling charge added to every chain.
DRIVE LINK COUNT= NUMBER OF DRIVE TEETH. These teeth are located on the inside of the chain and sit in the groove of the bar. A correct drive link count is essential for correct chain fit.
General Description: Granberg ripping saw chain is made up of one set (2) scoring cutters and one set (2) clearing cutters. While there are many companies that sell chain for milling, no other company offers ripping chain that features our specific modifications to the top plate. Our process shaves off approximately half of the tooth lengthwise on the first and second cutter links of each 4 link group. By this method, each tooth takes only ¼ of the kerf, takes less feeding pressure than conventional chain, cuts faster, smoother, and takes less power than conventional full tooth (cross cut) chain.
MADE IN THE USA
|Dimensions||1 × .5 × .25 in|